Available shapes

Type of SELFOIL® bearing
Usage
Assembly example
Available dimensions
Type A Cylindrical
Usage
Suitable when the bearing is working under radial load, with no or with very low axial load.
Assembly example
Available dimensions
636 standard dimensions:
- Inner diameter from 2 mm up to 100 mm
- Outer diameter from 5 mm up to 120 mm
- Length from 2 mm up to 120 mm
Type B Cylindrical with flange
Usage
Suitable when the bearing is working under axial load, with or without radial load. The flange absorbs the axial load.
Assembly example
Available dimensions
236 standard dimensions:
- Inner diameter from 3 mm up to 60 mm
- Outer diameter from 6 mm up to 70 mm
- Length from 4 mm up to 60 mm
Type C Spherical
Usage
Suitable when the bearing must swivel, or when the bearing must allow for some shaft misalignment.
Assembly example
Available dimensions
8 standard dimensions:
- Inner diameter from 4 mm up to 12 mm
- Sphere diameter from 10 mm up to 23 mm
- Length from 8 mm up to 16 mm
Type T Solid and hollow rods
Usage
Suitable when the bearing dimensions can not be adapted to any standard dimension of SELFOIL® bearings. The rod should be machined to the size required, and then reimpregnated
Assembly example
See previous examples
Available dimensions
94 standard dimensions:
- Inner diameter from 0 mm up to 150 mm
- Sphere diameter from 15 mm up to 202 mm
- Length from 25 mm up to 140 mm
Copyright © 2024 Selfoil. All rights reserved